Light Concrete Foaming Agent Supplier

Q: What is a Light Concrete Foaming Agent, and how does it work?

A Light Concrete Foaming Agent is a chemical additive used to produce lightweight cellular concrete . It generates stable foam when mixed with water and cement, creating a high-volume, low-density concrete mix with excellent thermal insulation and soundproofing properties .

Q: Where can ibeam’s Light Concrete Foaming Agent be used?

Our high-quality Light Concrete Foaming Agent is ideal for: • Lightweight concrete production – Reduces overall material weight. Roof insulation & floor screeds – Enhances thermal and acoustic performance. Void filling & soil stabilization – Used in geotechnical applications. Precast concrete blocks & panels – Improves workability and energy efficiency. Road sub-base & embankments – Reduces load stress on foundations.

Q: What are the benefits of using ibeam’s Light Concrete Foaming Agent?

Using Light Concrete Foaming Agent offers multiple advantages: Produces lightweight concrete – Reduces structural load. Improves thermal & sound insulation – Enhances building comfort. Enhances workability & reduces material cost – Uses less cement. Environmentally friendly & non-toxic – Safe for use in green buildings. Easy to use & compatible with cement and sand mixes.

Q: How is Light Concrete Foaming Agent used?

Prepare the foam solution – Mix the foaming agent with water. Generate foam using a foam generator – Ensure uniform bubble structure. Mix with cement slurry or mortar – Blend to achieve desired consistency. Pour or pump into molds or site areas – Allow to set and cure.

Q: What is the density of foam concrete produced with this agent?

The density of foam concrete can range from 300 kg/m³ to 1,600 kg/m³ , depending on the mix design and application requirements.

Q: How does this foaming agent improve energy efficiency?

The lightweight concrete created with this agent has high thermal insulation properties , reducing heat transfer and lowering energy consumption in buildings.

Q: Is this foaming agent compatible with all cement types?

Yes! Our Light Concrete Foaming Agent is compatible with Portland cement, fly ash, and other cementitious materials .

Q: Is ibeam’s Light Concrete Foaming Agent suitable for high-strength applications?

Yes! It can be used in load-bearing applications by adjusting the mix ratio to achieve higher compressive strength.

Q: What packaging sizes are available?

We offer various packaging options , including small containers and bulk drums . Contact us for custom sizes and bulk orders .

Q: How can I purchase ibeam’s Light Concrete Foaming Agent at the best price?

We offer manufacturer-direct pricing with special discounts on bulk orders . Therefore, contact ibeam today for custom quote .

Description

Light concrete foaming agent is a light yellow light concrete foaming agent for use in all light and cellular concrete and screeds. Foamed (cellular) concrete may have densities from as low 500 kg/m3 to 1600kg/m3 and strength from less than 1 N/mm2 to 25N/mm2. Our foaming agents are of good quality and have been proven by its usage in many countries around the world for various applications such as block production, pre cast panels, in-situ concrete, decorative concrete and void filling,

Foam Concrete is produced by incorporating a uniform structure of fine air bubbles into concrete mix consisting of cement, water and optionally sand. Precise volume management of the air content in the mix is controlled by the amount of added foam, which is produced from a specially designed liquid concentrate using a foam generator. Foam concrete has awide range of applications including pre-cast, geotechnical fill, foundation plates, structural applications and void filling.

Properties:

Reliable Foam Concrete is inherently a very long- lasting material.
Excellent insulating material % allow fast construction.
Highly workable material that can be easily poured into various shapes.
Provides additional acoustic insulation for floors and roofs.
Make a very smooth, consistent surface – something that is very difficult with regular concrete.
Can be a sturdy fire-resistant barrier providing satisfactory protection for hours.

Area of application:

Compatible with most of the foam generators.
Roof Slope without unnecessary weight on the building.
Good thermal and cold insulation for roof and wall.
Insulation of pipes in cold conditions.

Important Note:

The quality of the cement is directly determine to the strength of the concrete. So, it should be fresh and fine .The water should meet the standard of drinking water.

Water-Cement ratio is very critical due to its effect on the quality of the foam concrete. It has been noticed that the most advantages water- cement ratio is between 0.4 and 0.45

And one cubic meter of foam concrete requires between 400-450 kg of cement depending on initial densities.

Available Brands:

Neofoam FA300, Oxifoam,

Light Concrete Foaming Agent FAQs

What is a Light Concrete Foaming Agent, and how does it work?

A Light Concrete Foaming Agent is a chemical additive used to produce lightweight cellular concrete. It generates stable foam when mixed with water and cement, creating a high-volume, low-density concrete mix with excellent thermal insulation and soundproofing properties.

Where can ibeam’s Light Concrete Foaming Agent be used?

Our high-quality Light Concrete Foaming Agent is ideal for:

•Lightweight concrete production – Reduces overall material weight.
Roof insulation & floor screeds – Enhances thermal and acoustic performance.
Void filling & soil stabilization – Used in geotechnical applications.
Precast concrete blocks & panels – Improves workability and energy efficiency.
Road sub-base & embankments – Reduces load stress on foundations.

What are the benefits of using ibeam’s Light Concrete Foaming Agent?

Using Light Concrete Foaming Agent offers multiple advantages:

Produces lightweight concrete – Reduces structural load.
Improves thermal & sound insulation – Enhances building comfort.
Enhances workability & reduces material cost – Uses less cement.
Environmentally friendly & non-toxic – Safe for use in green buildings.
Easy to use & compatible with cement and sand mixes.

How is Light Concrete Foaming Agent used?

Prepare the foam solution – Mix the foaming agent with water.
Generate foam using a foam generator – Ensure uniform bubble structure.
Mix with cement slurry or mortar – Blend to achieve desired consistency.
Pour or pump into molds or site areas – Allow to set and cure.

Superior foam stability for lightweight concrete production.
Enhances thermal & sound insulation properties.
Eco-friendly, cost-effective & easy to use.
Available in multiple packaging sizes for different project needs.
Fast delivery across UAE with competitive pricing.

Additional information

Liters	20 Liters, 200 Liters

Light Concrete Foaming Agent

At Manufacturer Price

Why ibeam?

Description

Properties:

Area of application:

Important Note:

Available Brands:

Light Concrete Foaming Agent FAQs

What is a Light Concrete Foaming Agent, and how does it work?

Where can ibeam’s Light Concrete Foaming Agent be used?

What are the benefits of using ibeam’s Light Concrete Foaming Agent?

How is Light Concrete Foaming Agent used?

What is the density of foam concrete produced with this agent?

How does this foaming agent improve energy efficiency?

Is this foaming agent compatible with all cement types?

Is ibeam’s Light Concrete Foaming Agent suitable for high-strength applications?

What packaging sizes are available?

How can I purchase ibeam’s Light Concrete Foaming Agent at the best price?

Why Choose ibeam’s Light Concrete Foaming Agent?

Additional information