Manual Tile Cutter

Usage:

Through the ergonomic handle, push engraving is performed, which is absolutely effective on all materials and becomes indispensable on large format tiles. Two measurement scales are located on the goniometric square of the tile cutter. The first one, the one placed on the inclined side, refers to the side of the tile and provides the correct measurement for all angles. The second scale shown on the top of the square, provides the diagonal measurement for 45° cuts and is particularly useful to installers.

The tool holder handle encapsulates multiple special features:

The dual splitting system, which intervenes in both customary cuts (without requiring any retraction of the handle after the incision phase) and in cuts on the corner of the tile or mosaic cuts and automatically positions itself with a simple movement.

The built-in lubricator for the tungsten carbide engraving wheel (titanium coated) that can be operated when needed by the operator with gentle pressure directly on the dispenser.

The R.A.S. (Roller Adjuster System) device. A cylinder made of antifriction and wear-resistant material that always maintains contact with the bar/crossbar, effectively nullifying any lateral movement, ensures perfect sliding of the tool holder and thus super-precise engravings.

Features Tile Cutter: This tile cutter has a die-cast aluminum and nickel-plated steel construction for maximum strength and weatherproofing. The cut-off stand of the tile cutter is made of special scratch-resistant plastic material. Standard Titanium caster (special for porcelain stoneware), square and extension fully foldable within machine footprint. Sprung tops to allow safe splitting of tile and pull-out support rod for large tiles (on models 63P3, 75P3, 93P3, 125P3 and 155P3 only).