Rust Remover

Description

Features:

• Excellent wetting capacity and anticorrosion protection on both ferrous and non-ferrous metals.
• Safer to use then blasting and grinding • Economical concentrate.
• Can be diluted with water to any concentration needed (see directions for detail)

Applications:

• Rust and scale removel from ferrous metals and non-ferrous metals.
• Heavy duty cleaning of in-process parts and assemblies.
• Metals preparation prior to painting.
• Oxidation and stains removal from
  aluminum, brass, copper etc.
• Metals preparation prior to painting.

Application Method:

• For Heavy rust and scale (ferrous metals) – Dilute concentrate with 1to 2parts water.
• Metal should be immersed 20 minutes to 1hour. Remove and clean the metal or parts with water.
• Heavy corrosion (non-ferrous) dilute concentrate with 2 to 3 parts water. Metal should be immersed 20 minutes to 1hour.
• Periodically check non ferrous metals. Remove and rinse with water.
• As a metal cleaner (ferrous and non-ferrous) dilute concentrate with 4 to 5 parts water.
• Metal may be immersed, brushed or wiped until the desired brightness si obtained and finally rinse with water and dry.
• Heating up 65 degree celsius will speed up the rust removel process and ease penetration of surface active agents.

Safety Guidelines:

The product is mildly acidic. Before using this product, read the safety instructions provided in the MSDS
carefully which gives detailed safety information and guidance. For a good safe practice on-site:
• Wear suitable protective clothing
• Keep out of reach of children
• Avoid contact with skin and eyes • Dispose as per local authority norms