Features:
- Excellent wetting capacity and anticorrosion protection on both ferrous and non-ferrous metals.
- Safer to use then blasting and grinding • Economical concentrate.
- Can be diluted with water to any concentration needed (see directions for detail)
Applications:
- Rust and scale removal from ferrous metals and non-ferrous metals.
- Heavy-duty cleaning of in-process parts and assemblies.
- Metals preparation prior to painting.
- Oxidation and stain removal from
aluminum, brass, copper etc. - Metal preparation prior to painting.
Application Method:
• For Heavy rust and scale (ferrous metals) – Dilute concentrate with 1 to 2 parts water.
• Metal should be immersed for 20 minutes to 1 hour. Remove and clean the metal or parts with water.
• Heavy corrosion (non-ferrous): dilute concentrate with 2 to 3 parts water. Metal should be immersed for 20 minutes to 1 hour.
• Periodically check non-ferrous metals. Remove and rinse with water.
• As a metal cleaner (ferrous and non-ferrous), dilute concentrate with 4 to 5 parts water.
• Metal may be immersed, brushed, or wiped until the desired brightness si obtained and finally rinse with water and dry.
• Heating up to 65 degrees Celsius will speed up the rust removal process and ease penetration of surface active agents.
Safety Guidelines:
The product is mildly acidic. Before using this product, read the safety instructions provided in the MSDS
carefully which gives detailed safety information and guidance. For a good safe practice on-site:
• Wear suitable protective clothing
• Keep out of reach of children
• Avoid contact with skin and eyes • Dispose as per local authority norms


