Waterproofing membrane

Description

Waterproofing membrane is a high-quality polymer-rich APP modified bituminous torch-on membrane with a reinforcement core of tough glass fiber reinforcement, used as a first layer in multi-layer roof waterproofing system.

Waterproofing membranes are produced using a special grade of bitumen modified with virgin APP polymer. The polymer-rich mixture is used to saturate and coat both sides of the glass fiber mat to the required thickness of the membranes.

Advantages of waterproofing membrane:

• Waterproof Protection: Prevents water leakage, safeguarding structural integrity.
• Durability: Withstands harsh weather conditions and environmental stress.
• Energy Efficiency: Some membranes provide thermal insulation, improving energy efficiency.
• Long-Term Reliability: Protects buildings from moisture, mold, and decay, extending the lifespan of structures.

Waterproofing membranes are essential for ensuring that your construction projects remain safe, dry, and durable, providing long-term protection for both residential and commercial buildings.

Waterproofing membranes supplied by ibeam construction products confirm and exceed the requirements of ASTM, UEAtc and other relevant international standards.

Available size: 1X10m Roll

23 roll in a pallet.

Application method of waterproofing membrane:

Surfaces onto which the membrane is to be applied must be sound, clean and dry. Dust, loose material and protrusions must be removed and cracks, holes etc made good.

Priming: Apply one coat of solvent based bituminous primer to all surfaces at 5-6 m2/lit and

allow to dry. Primed surfaces must be covered within the same day. If left exposed for longer periods,

clean and re-prime before applying the membrane.

Membrane Application: Position the rolls carefully with the correct orientation before the torching operation begin. Heat the lower surface of the rolls with a propane gas torch and unroll as the bitumen begins to melt. Maintain minimum 100 mm side laps and 150 mm end laps between rolls, staggering the joints where possible. All seams must be heat sealed from the top to ensure watertight laps.

Protection: Once laid, it is recommended to protect the membrane from long-term exposure, construction abuse and backfill, preferably within 24 hours. On vertical areas use bituminous protection board is recommended; on horizontal surfaces a minimum 25 mm thick sand-cement screed may be used.

ibeam, trusted supplier of waterproofing membrane in Middle East region, we take care of proposing right material for your building waterproofing application.

Available brands:

Bituroll-p, Bituplus P 4270,Bituroll-P, Oxiplus APP, Neoflex APP 4180, Ecogum SP, Duplas AP, Corroprufe APP, Proofex Torchseal 3P & 4P, CORROPRUFE APP4180, CORROPRUFE APP4200, PLASTIFLEX FLAM 180, Nuroll, Neofelt, Oxifelt, Plastifelt, PLASTIFLEX FLAM V.V