Cold-applied bitumen emulsion is used for general waterproofing, damp-proofing, and protective coating of below-ground concrete structures against ground-salt attack. It can also be used as the protective coating for built-up roofing systems and other exposed surfaces, as a damp-proofing membrane, or as a vapour seal.
Properties of Cold-Applied Bitumen Emulsion:
- VOC No health or environmental hazard.
- Safe to apply in poorly ventilated or confined areas.
- Easy to use.
- Cold applied.
- Good resistance chemicals in the soil like chlorides and
- Excellent adhesion on most surfaces.
- Confirms to ASTM D 1227, Type III, Class
AREAS OF APPLICATION:
- Concrete foundations above the water
- Block
- Building facades.
- Protective coating for built-up roofing systems.
COVERAGE RATE:
At a thickness of 125 microns, it can achieve a coverage of 4 m²/L /2 coats.
TECHNICAL SPECIFICATION:
| PROPERTIES | TYPICAL VALUES | TEST STANDARDS |
| Color | Dark Brown | – |
| Density, g/cc | 1.02 ± 0.02 | ASTM D 1475 |
| Form | Thick viscous liquid | – |
| Solid Content | >35 ± 5% | ASTM D 6511-M |
| Full cure@ 25°c | 24 hrs. | – |
| Application Temp | 5°C to 50°C | – |
| Service temp | -5°C to 80°C | – |
| VOC | <50g/ltr | ASTM D 3960 |
Available brands:
Polycoat WB, Dry Prime WB, Aquadere, Polycoat, Ultra Coat, Oxiprime WB, Saudi Coat, Neocoat, Buston coat, CORROPRUFE 65, Oxicoat WB, BITUMEN PAINT, COLPHENE DPE 1000, DUCOAT 100, DUPRIME E, Oxicoat, Bitumen paint.







