Mould Release Agent

Description

Single component solvent/water based mould and shutter releasing agent suitable for mould and shutter faces prior to casting to concrete in order to achieve to clean release. After removal of the form work, the resultant concrete has a smooth hard uniform finish, with reduced incidence of blow holes. It can be applied to the formwork by spray in the form of a light uniform mist coating.

Mold release agent are used to prevent materials from sticking to the surfaces of molds, dies, or other tools and equipment. it facilitate the easy removal of finished products or parts from molds, which is crucial for maintaining product quality and the efficiency of production processes.

Properties:

• It reacts chemically with cement to impart excellent release properties to treated surfaces. Concrete cast against surfaces coated with it exhibit a smooth, hard, uniform finish.
• It has no negative effect and the properties of the concrete, nor will it impair the adhesion of subsequent surface treatments when applied at the recommended coverage rates. Easy release, reducing damages and improve the efficiency.

Advantages of Mould release agent:

• Easy to apply.
• Reduces blow holes.
• Protects steel from corrosion.
• Non staining.
• High coverage.

Area of application:

• Playwood.
• Timber.
• Steel.
• Plastic faced formwork and mould

Method of application;

• All mould and shutter surfaces must be cleaned from deposits of rust, concrete, oil, contaminants and other materials. It can be applied to new or old form work.
• It can be applied by brush roller or mould oil sprayer. Apply before the first casting and thereafter re-apply immediately after stripping and cleaning the mould Light weight horticultural sprayers are ideal as mould release agent is finely atomized to give a uniform coating. Excessive applications should be avoided.
• Alternatively, application may be made by a fine haired brush, only a very thin coating should be made and any excess removed. If after the first application, It is completely absorbed into new timber or plywood, a further application should be made before filling the mould or formwork.
• Compostition: Low viscosity hydrocarbon carrier, blended with a chemically active release agent.

Available packing: 20L pail & 200L drum.

Available brands:

Neorelease SB, Neorelase WB, MAPEFORM SB, CRESRELEASE SB, weberad dem 22, MAPEFORM ECO 31
REEBOL, CONDAT Mould release agents, Separol®-320 WS, POLYRELEASE WB, Oxirelease WB, Oxirelease SB, POLYRELEASE SB, DARAKOTE® MRA3, Araldite QZ13, Disarmante W, SpECbuild MRA, Form Release Agent cemol 35 n35, Cresrelease WB, Cresrelease SB.