Self-Adhesive Bituminous Waterproofing Membrane
Self-Adhesive Bituminous Waterproofing Membrane is a polymer-modified bituminous sheet designed to bond to a suitably prepared substrate. The release backing is removed during installation, exposing the adhesive surface.
ibeam supplies self-adhesive membranes for waterproofing and damp-proofing projects. The selected product must suit the substrate, water exposure, installation conditions and required protection system.
Features and Benefits
- Cold-applied bonding: The self-adhesive layer bonds without torching the main membrane sheet.
- Sheet-format application: Supports a planned installation with defined joints and detailing.
- Horizontal and vertical applications: Suitable products can be installed on prepared surfaces in approved systems.
- Waterproofing and damp-proofing options: Different grades address different project specifications.
- Removable backing: Protects the adhesive surface before installation.
Technical Overview
| Parameter | Product Information |
|---|---|
| Product Type | Self-adhesive bituminous sheet membrane |
| Base Material | Polymer-modified bitumen |
| Application Method | Cold-applied self-adhesive bonding |
| Adhesive Protection | Removable release backing |
| Listed Roll Formats | 1 × 10 m and 1 × 15 m |
| Gross Roll Area | 10 m² or 15 m² respectively |
| Reinforcement and Surface Finish | Vary by product model |
| Typical Installation | Prepared substrate with the specified primer, laps and detailing system |
Roll format and availability depend on the selected product. Gross area excludes side laps, end laps, upstands, terminations and cutting losses.
Typical Applications
Depending on the selected membrane and approved system, applications can include:
- External waterproofing of foundations and retaining walls.
- Below-ground concrete structures.
- Protected balcony and terrace waterproofing.
- Suitable wet-area floor systems.
- External faces of underground tanks and similar structures.
- Underlay applications beneath compatible roof coverings.
Suitability for water pressure, direct water contact or a particular roof assembly must be established for the exact product.
Surface Preparation and Installation
Prepare a sound, even substrate free from contaminants and loose material. Repair defects and apply the primer specified for the selected membrane. Allow it to reach the required condition before laying the sheet.
Align the membrane, progressively remove the release backing and press the sheet firmly onto the substrate. Use the manufacturer’s recommended rolling method to achieve contact and reduce trapped air.
Follow the specified side laps, end laps and details at corners, penetrations and terminations. Installation temperature, substrate moisture and weather conditions must remain within the product’s permitted limits.
Protection After Installation
Protect the completed membrane from following trades, sharp materials and backfilling damage. Install the specified protection board, screed or covering appropriate to the waterproofing assembly.
Permanent exposure to sunlight is suitable only where the selected membrane is expressly designed for that use.
Available Brands and Product Ranges
Enquiries can be made for product ranges listed by ibeam, including:
- Polybit Bitustick.
- Duseal FG.
- Corroprufe self-adhesive membranes.
- Oxistick.
- Colphene self-adhesive membranes.
Brand, model and availability depend on the project requirement. Products within these ranges can differ in reinforcement, facing, thickness, application conditions and performance.
Request a Quotation
Provide the specified brand or model, required thickness, roll format, quantity, application and delivery requirements. Include the approved waterproofing specification and any technical-documentation requirements.







